欢迎访问suncitygroup太阳集团网址!

​孙靖宇教授课题组与合作者在Nano Energy上发表研究论文

发布者:金霞发布时间:2019-10-30浏览次数:352

标题:Elevated Polysulfide Regulation by an Ultralight All-CVD-Built ReS2@N-Doped Graphene Heterostructure Interlayer for Lithium–Sulfur Batteries

作者:Nan Wei1,2, Jingsheng Cai1, Ruochen Wang3, Menglei Wang1, Wei Lv3, Haina Ci1,2, Jingyu Sun1,2, & Zhongfan Liu1,2,4

单位:1. College of Energy, Soochow Institute for Energy and Materials Innovations (SIEMIS), Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou 215006, P. R. China

2. Beijing Graphene Institute (BGI), Beijing 100095, P. R. China

3. Shenzhen Key Laboratory for Graphene-based Materials, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, P. R. China

4. Center for Nanochemistry (CNC), College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, P. R. China

摘要:Lithium–sulfur battery is amongst the most promising next-generation energy storage technology owing to their high theoretical capacity and energy density. Nevertheless, the notorious shuttle effect of lithium polysulfides (LiPSs) seriously impedes its practical applications. Here, we report an all-CVD approach to realize the direct growth of ReS2@N-doped graphene (NG) heterostructure, which serves as an ultralight high-performance interlayer for elevated LiPS regulationvia easy transfer onto the commercial separator. In contrast to the tranditional interlayers constructed via vacuum filtration of nanostructured materials that inevitably increase the thickness and weight of the separator, our all-CVD-enabled ReS2@NG film possesses an area of 15 mm × 100 mm, a thickness of ~0.5 μm and a negligible areal weight of 80-90 μg cm−2. Benefiting from the two-dimensional (2D) vertically-erected nanostructure, adsorptive ReS2-conductive NG interface, and favorable electrical conductivity, thus-derived ReS2@NG interlayer readily enhances reaction kinetics for LiPS conversion and boosts the reutilization of trapped LiPS whilst guaranteeing smooth transportation of lithium ions. Accordingly, an initial discharge capacity of 854 mAh g−1 with an average capacity decay of 0.064% per cycle after 800 cycles can be harvested at 2.0 C. Even at a high sulfur loading of 6.4 mg cm−2, an initial areal capacity of 6.1 mAh cm−2 can be gained, which still retains 5.8 mAh cm−2 after 40 cycles at 0.1 C. This work is anticipated to shed light upon the construction of CVD-enabled versatile 2D heterostructures for enriching the interlayer design with multifunctionality and cost-effectiveness.

影响因子:15.548

原文链接:https://www.sciencedirect.com/science/article/pii/S2211285519308973


XML 地图